| Customization: | Available |
|---|---|
| Application: | Detector, Diode, LCD Display Controller, Power Electronic Components, Radio, Refrigerator, Solar Cell, Television, Temperature Measurement |
| Batch Number: | 2023+ |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameters | Symbol | Test Conditions | Values | Unit |
| State the average current | IF(AV) | Single phase ,half wave 180°conduction Tc=85ºC |
110 | A |
| Surge forward current | IFSM | t=10mS TJ =45ºC | 2250 | A |
| Maximum I2t for fusing | I2t | t=10mS TJ =45ºC | 25000 | A2s |
Isolation Breakdown Voltage(R.M.S) |
Visol |
Ac.50HZ;R.M.S;1min | 2500 | V |
| Ac.50HZ;R.M.S;1sec | 3500 | V | ||
| Operating Juntion Temperature | TJ | -40~+125 | ºC | |
| Storage Temperature | Tstg | -40~+125 | ºC | |
Mounting Torque |
Mt | To terminals(M5) | 3±15% | Nm |
| Ms | To heatsink(M6) | 5±15% |
| Module(Approximately) | Weight | 100 | g |
| Electrical Characteristics | ||||||
Parameters |
Symbol |
Test Conditions |
Values | Unit |
||
| Min. | Typ. | Max. | ||||
| Maximum Forward voltage drop | VFM | T=25ºC IF =110A | - | 1.05 | 1.2 | V |
| Maximum Repetitive Peak Reverse Current | IRRM |
TJ=25ºC VRD=VRRM | - | - | 100 | uA |
| TJ=150ºC VRD=VRRM | - | - | 5 | mA | ||
| Thermal Characteristics | ||||
| Parameters | Symbol | Test Conditions | Values | Unit |
| Maximum internal thermal resistance, junction to case per leg |
Rth(J-C) | Per diode | 0.26 | ºC/W |
| Typical thermal resistance, case to heatsink per module |
Rth(C-S) | Module | 0.10 | ºC/W |
| Maximum Ratings | ||||
| Parameters | Symbol | Test Conditions | Values | Unit |
| Average On-State Current | ITAV | Sine 180ºC;TC=85ºC | 110 | A |
Surge forward current |
ITSM |
t=10ms TJ=45ºC | 2250 | A |
| t=10ms TJ=125ºC | 1900 | |||
MaximumI2tfor fusing |
I2t |
t=10ms TJ=45ºC | 25000 | A2s |
| t=10ms TJ=125ºC | 18000 | |||
Isolation Breakdown Voltage(R.M.S) |
Visol |
AC 50HZ; R.M.S.; 1min | 2500 | V |
| Ac.50HZ;R.M.S;1sec | 3500 | V | ||
| Operating Juntion Temperature | TJ | -40~+125 | ºC | |
| Storage Temperature | Tstg | -40~+125 | ºC | |
Mounting Torque |
Mt | To terminals(M5) | 3±15% | Nm |
| Ms | To heatsink(M6) | 5±15% | ||
Maximum non-repetitive rate of rise of turned on current |
di/dt |
TJ=25ºC from 0.67VDRM , ITM=π× IT(AV) ,Ig=500mA tr<0.5us tp>6us |
150 |
A/us |
| Maximum critical rate of rise of | dv/dt | TJ =125ºC,VD=2/3VDRM | 1000 | V/us |
| off-state voltage | ||||
| Maximum allowable acceleration | a | 50 | m/s2 |
| Electrical Characteristics | ||||||
Parameters |
Symbol |
Test Conditions |
Values | Unit |
||
| Min. | Typ. | Max. | ||||
| Maximum Peak On-State Voltage | VTM | ITM =110A, TJ=25ºC | 1.25 | V | ||
| Maximum Repetitive Peak Reverse Current/ Maximum Repetitive Off-state Current |
IRRM/ IDRM |
TJ=125ºC VRD=VRRM |
20 |
mA |
||
| On state threshold voltage | VTO | For power-loss calculations only TJ=125ºC |
0.9 | V | ||
| Maximum Value of on-state slope resistance |
rT | TJ=125ºC | 2.0 | mΩ | ||
| Maximum gate voltage required to trigger |
VGT |
TJ=25ºC,VD=6V | 3 |
V |
||
| Maximum gate current required to trigger |
IGT | TJ=25ºC,VD=6V | 150 | mA | ||
| Maximum gate voltage that will not trigger |
VGD | TJ=125ºC,VD=2/3VDRM | 0.25 | V | ||
| Maximum gate current that will not trigger |
IGD | TJ=125ºC,VD=2/3VDRM | 6 | mA | ||
| Maximum Latching current | IL | TJ=25ºC,IG=1.2IGT | 250 | 600 | mA | |
| Maximum Holding current | IH | TJ=25ºC,IT=1A | 200 | 250 | mA | |
| Gate controlled delay time | tgd | TJ=25ºC,IG=1A ,diG/dt=1A/us | 1 | us | ||
| Gircuit commutated turn-off time | tq | TJ=125ºC | 250 | us | ||
Q1.What advantages do you have?
A1. Solex emerges as a premier direct manufacturer proudly located in the vibrant city of Cangzhou, China. Our exemplary team, proficient in development, marketing, and production, is dedicated to offering remarkably competitive prices and unsurpassed service to our esteemed clients.
Q2. What's your main product?
A2. We proudly present an extensive range of three exceptional product series: innovative solid state relays, adaptable thyristor regulators (covering both power and voltage spectrums), and advanced wafer-making furnace heaters.
Q3. Could you print our own logo?
A3. Absolutely! We cater to Retail and Wholesale customers, along with OEM and ODM needs, offering you the opportunity to showcase your distinct logo on our extraordinary products.
Q4. How long is the quality guarantee?
A4. We offer an exceptional 18-month warranty, ensuring each product undergoes thorough inspection to guarantee impeccable quality before departure from our facility.
Q5. How long is the deliver time?
A5. For your utmost convenience, sample orders are swiftly dispatched within a brief 3 - 5 working days, while larger orders are efficiently completed within a span of approximately 10 - 25 days.
Q6. What is your payment terms?
A6. We provide versatile payment terms, featuring T/T, Western Union, Money Gram, and L/C at sight, to suit your unique requirements.
Q7. Any certification of your company or product?
A7. Our steadfast commitment to quality and excellence is endorsed by prestigious certifications including ISO 9001, CE, CB, and TUV.
){kind=link}