| Customization: | Available |
|---|---|
| Application: | Detector, Diode, LCD Display Controller, Power Electronic Components, Radio, Refrigerator, Solar Cell, Television, Temperature Measurement |
| Batch Number: | 2023+ |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameters | Symbol | Test Conditions | Values | Unit |
| State the average current | IF(AV) | Single phase ,half wave 180°conduction Tc=85ºC |
110 | A |
| Surge forward current | IFSM | t=10mS TJ =45ºC | 2250 | A |
| Maximum I2t for fusing | I2t | t=10mS TJ =45ºC | 25000 | A2s |
Isolation Breakdown Voltage(R.M.S) |
Visol |
Ac.50HZ;R.M.S;1min | 2500 | V |
| Ac.50HZ;R.M.S;1sec | 3500 | V | ||
| Operating Juntion Temperature | TJ | -40~+125 | ºC | |
| Storage Temperature | Tstg | -40~+125 | ºC | |
Mounting Torque |
Mt | To terminals(M5) | 3±15% | Nm |
| Ms | To heatsink(M6) | 5±15% |
| Module(Approximately) | Weight | 100 | g |
| Electrical Characteristics | ||||||
Parameters |
Symbol |
Test Conditions |
Values | Unit |
||
| Min. | Typ. | Max. | ||||
| Maximum Forward voltage drop | VFM | T=25ºC IF =110A | - | 1.05 | 1.2 | V |
| Maximum Repetitive Peak Reverse Current | IRRM |
TJ=25ºC VRD=VRRM | - | - | 100 | uA |
| TJ=150ºC VRD=VRRM | - | - | 5 | mA | ||
| Thermal Characteristics | ||||
| Parameters | Symbol | Test Conditions | Values | Unit |
| Maximum internal thermal resistance, junction to case per leg |
Rth(J-C) | Per diode | 0.26 | ºC/W |
| Typical thermal resistance, case to heatsink per module |
Rth(C-S) | Module | 0.10 | ºC/W |
| Maximum Ratings | ||||
| Parameters | Symbol | Test Conditions | Values | Unit |
| Average On-State Current | ITAV | Sine 180ºC;TC=85ºC | 110 | A |
Surge forward current |
ITSM |
t=10ms TJ=45ºC | 2250 | A |
| t=10ms TJ=125ºC | 1900 | |||
MaximumI2tfor fusing |
I2t |
t=10ms TJ=45ºC | 25000 | A2s |
| t=10ms TJ=125ºC | 18000 | |||
Isolation Breakdown Voltage(R.M.S) |
Visol |
AC 50HZ; R.M.S.; 1min | 2500 | V |
| Ac.50HZ;R.M.S;1sec | 3500 | V | ||
| Operating Juntion Temperature | TJ | -40~+125 | ºC | |
| Storage Temperature | Tstg | -40~+125 | ºC | |
Mounting Torque |
Mt | To terminals(M5) | 3±15% | Nm |
| Ms | To heatsink(M6) | 5±15% | ||
Maximum non-repetitive rate of rise of turned on current |
di/dt |
TJ=25ºC from 0.67VDRM , ITM=π× IT(AV) ,Ig=500mA tr<0.5us tp>6us |
150 |
A/us |
| Maximum critical rate of rise of | dv/dt | TJ =125ºC,VD=2/3VDRM | 1000 | V/us |
| off-state voltage | ||||
| Maximum allowable acceleration | a | 50 | m/s2 |
| Electrical Characteristics | ||||||
Parameters |
Symbol |
Test Conditions |
Values | Unit |
||
| Min. | Typ. | Max. | ||||
| Maximum Peak On-State Voltage | VTM | ITM =110A, TJ=25ºC | 1.25 | V | ||
| Maximum Repetitive Peak Reverse Current/ Maximum Repetitive Off-state Current |
IRRM/ IDRM |
TJ=125ºC VRD=VRRM |
20 |
mA |
||
| On state threshold voltage | VTO | For power-loss calculations only TJ=125ºC |
0.9 | V | ||
| Maximum Value of on-state slope resistance |
rT | TJ=125ºC | 2.0 | mΩ | ||
| Maximum gate voltage required to trigger |
VGT |
TJ=25ºC,VD=6V | 3 |
V |
||
| Maximum gate current required to trigger |
IGT | TJ=25ºC,VD=6V | 150 | mA | ||
| Maximum gate voltage that will not trigger |
VGD | TJ=125ºC,VD=2/3VDRM | 0.25 | V | ||
| Maximum gate current that will not trigger |
IGD | TJ=125ºC,VD=2/3VDRM | 6 | mA | ||
| Maximum Latching current | IL | TJ=25ºC,IG=1.2IGT | 250 | 600 | mA | |
| Maximum Holding current | IH | TJ=25ºC,IT=1A | 200 | 250 | mA | |
| Gate controlled delay time | tgd | TJ=25ºC,IG=1A ,diG/dt=1A/us | 1 | us | ||
| Gircuit commutated turn-off time | tq | TJ=125ºC | 250 | us | ||
Q1.What advantages do you have?
A1. Solex stands as a premier direct manufacturer strategically located in the vibrant city of Cangzhou, China. Our team of exceptional experts in development, marketing, and production is ardently committed to offering fiercely competitive pricing and unparalleled service to our cherished clients.
Q2. What's your main product?
A2. We proudly present a diverse array of three outstanding product lines: cutting-edge solid state relays, versatile thyristor regulators (covering both power and voltage), and innovative wafer-making furnace heaters, each crafted for superior performance.
Q3. Could you print our own logo?
A3. Absolutely! We serve both Retail and Wholesale customers, as well as OEM and ODM requests, offering you the exclusive chance to showcase your custom logo on our high-quality products.
Q4. How long is the quality guarantee?
A4. We provide an extraordinary 18-month warranty, ensuring each product undergoes rigorous inspection to affirm quality before it departs from our factory.
Q5. How long is the deliver time?
A5. For your utmost convenience, sample orders are swiftly delivered within 3 - 5 working days, while bulk orders are efficiently managed within an estimated 10 - 25 days.
Q6. What is your payment terms?
A6. We present flexible payment terms, including T/T, Western Union, Money Gram, and L/C at sight, to seamlessly suit your individual needs.
Q7. Any certification of your company or product?
A7. Our steadfast commitment to quality and superiority is affirmed by distinguished certifications, including ISO 9001, CE, CB, and TUV.
){kind=link}